DZXD2A-12P Indoor high voltage sealed vacuum circuit breaker

DZXD2A-12P Indoor high voltage sealed vacuum circuit breaker

  • Vacuum circuit breaker

    DZXD2A-12P series indoor high-voltage sealed vacuum circuit breaker is an upgraded version of the indoor high-voltage switchgear VS1 (hereinafter referred to as the new VS1), suitable for rated voltage 12kV, frequency 50~60Hz three-phase AC power system, for industrial and mining enterprises and substations as electrical facilities control and protection, especially suitable for places with frequent operation or multiple short-circuit current breaking under rated current, can be used for fixed installation units, and can also be used as a handcart unit. Generally used with indoor air insulation switch cabinets (such as: KYN28 XGN2 XGN66, etc.).

  • Description
  • Technical specification

1. The DZXD2A-12P series can be widely used in power plants, substations, metallurgy, petrochemicals, railways, airports, manufacturing, residents, communities, etc.

2.The DZXD2A-12P series can meet the needs of rated current 630A~4000A and rated short-circuit breaking power 20~50kA. It can store energy with AC and DC power supplies or manually. It has the advantages of small size, strong breaking capacity, high insulation, no pollution, and no explosion hazard. This product can reliably protect the distribution facilities under normal conditions or fault conditions of the distribution system. It can be operated frequently and break short-circuit current multiple times (at rated values).

3.The DZXD2A-12P series of sealed poles uses special imported materials and special processes. The vacuum interrupter and upper and lower outlets are cast with epoxy resin. The product has a very low partial discharge value and a high voltage resistance level. It is not easily damaged after high and low temperature impact and mechanical impact, and is suitable for various working environments.

4.The vacuum interrupter in the ZXD2A-12P series solid-sealed pole adopts reliable metallization technology and brazing structure, one-time sealing technology, special aging, pressurized leak detection and other advanced technologies to ensure that the product can maintain reliable vacuum throughout its life and can operate with power for a long time. The DZXD2A-12P series complies with relevant standards such as GB1984-2003, JB3855-1996 and IEC.

Technical Specification

Parameter nameUnitTechnical Parameters
Rated voltageKV12
Rated short-time frequency withstand voltage (1 min)KV42
Rated lightning impulse withstand voltage (peak)KV75
Rated frequencyHZ50
Rated currentA630
Rated short-circuit breaking currentKA20
Rated short-time withstand currentKA20
Rated short circuit durationS≤0.04
Rated short-circuit closing currentKA50
Rated peak withstand currentKA50
Number of rated short-circuit current startsTimes30
Rated individual capacitor bank opening currentA≤630
Rated back-to-back capacitor bank opening currentA≤400
Rated capacitor bank closing inrush currentKA12.5(frequency≤1000HZ)
Closing timems≤80
Split timemsMaximum Voltage≤40
msRated Voltage ≤50
msMinimum Voltage ≤60
Time of ignitionms≤15
Mechanical life (M2)Times30000
Allowable cumulative thickness of dynamic and static contact wearmm3
Rated closing operating voltageVAC/DC 220
Rated breaking operating voltageVAC/DC 220
Rated operating voltage of energy storage motorVAC/DC 220
Rated power of energy storage motorW80(40KA Motor speed100W)
Energy storage times≤15
Contact opening distancemm9±1
Over traveling distancemm3.5±0.5
Contact closing bounce timems≤2
Three-phase switching and closing non-synchronousms≤2
Contact splitting rebound amplitudemm≤3
Contact closing contact pressure
KA20
N±8%2200
Average breaking speed (contacts separated by 6mm)m/s1.1±0.2
Average closing speed (6mm contact closure)m/s0.6±0.2
Dominant electric circuit resistanceA630
μΩ≤50
Rated operating sequence (1) 20~31.5KAMinutes - 0.3s - combined minutes - 180s - combined minutes
Rated sequence of operation (2) 40KAMinutes - 0.3s - combined minutes - 180s - combined minutes  
Secondary circuit frequency withstand voltage (1min)V2000


Relation Products